More bad news.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
More bad news.
02 Mar 2013 19:10 - 02 Mar 2013 19:16
I have already checked my valve clearances and did adjustments once. I have been having problems with bike not running correctly. I know I am not getting a fat blue spark but am still working on that problem. Anyhow I finally got around to doing a compression test on the cylinders and I think I found a major problem.
Compressions:
1: 120
2: 110
3: 40
4: 120
Yeah number three is bad. What do you suggest I do now? Should I recheck the valves to make sure they are still good? I don't know how it would have gotten off. Could the timing be off? But wouldn't that affect all cylinders if that was the case?
Compressions:
1: 120
2: 110
3: 40
4: 120
Yeah number three is bad. What do you suggest I do now? Should I recheck the valves to make sure they are still good? I don't know how it would have gotten off. Could the timing be off? But wouldn't that affect all cylinders if that was the case?
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Last edit: 02 Mar 2013 19:16 by badrhino.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: More bad news.
02 Mar 2013 19:49
Yeah Id check them again,nothing to lose.You could also dump a little oil down the plug holes and check numbers to see if the come up,if they come up Id lean towards rings not sealing.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- donthaveakawman
-
- User
-

Public
- Thanks: 0
Re: More bad news.
02 Mar 2013 19:52
did you make sure the throttle is open? I had 60 psi in my #2 that is why I am curious. might take the pipes and carbs off and spray some carb cleaner in the closed valves to see if they seal well.
Please Log in or Create an account to join the conversation.
- donthaveakawman
-
- User
-

Public
- Thanks: 0
Re: More bad news.
02 Mar 2013 20:32
re-edit, took the valve shims out of the intake, set the timing and now I have 100 psi in the #2 cylinder. thanks to some outside help- you all couldn't think of that?
Please Log in or Create an account to join the conversation.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
Re: More bad news.
02 Mar 2013 21:43
No I did not have the throttle open on any of the readings as the carbs are not on at the moment.
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: More bad news.
02 Mar 2013 22:13
I would check the valve clearance. Then if all is good i would perform a leak down test.
1977 KZ 1000 work in progress
Please Log in or Create an account to join the conversation.
- lushbaugh
-
- Offline
- User
-

Registered
- everybodys a pro......
- Posts: 509
- Thanks: 35
Re: More bad news.
02 Mar 2013 22:53Powerstroke_fan wrote: I would check the valve clearance. Then if all is good i would perform a leak down test.
yep
79 kz1000 ltd all apart
the best advice i can give is dont take dnthavakawmans advice..
the best advice i can give is dont take dnthavakawmans advice..
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: More bad news.
02 Mar 2013 23:01lushbaugh wrote:Powerstroke_fan wrote: I would check the valve clearance. Then if all is good i would perform a leak down test.
yep
Yep
KD9JUR
Please Log in or Create an account to join the conversation.
- donthaveakawman
-
- User
-

Public
- Thanks: 0
Re: More bad news.
05 Mar 2013 01:41spray some carb cleaner in the intake valves and see if it leaks past them.badrhino wrote: No I did not have the throttle open on any of the readings as the carbs are not on at the moment.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: More bad news.
05 Mar 2013 01:53donthaveakawman wrote:spray some carb cleaner in the intake valves and see if it leaks past them.badrhino wrote: No I did not have the throttle open on any of the readings as the carbs are not on at the moment.
Attachment stewie_2013-03-04.jpg not found
:laugh:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- lushbaugh
-
- Offline
- User
-

Registered
- everybodys a pro......
- Posts: 509
- Thanks: 35
Re: More bad news.
05 Mar 2013 02:05wireman wrote:donthaveakawman wrote:spray some carb cleaner in the intake valves and see if it leaks past them.badrhino wrote: No I did not have the throttle open on any of the readings as the carbs are not on at the moment.Attachment stewie_2013-03-04.jpg not found
:laugh:
79 kz1000 ltd all apart
the best advice i can give is dont take dnthavakawmans advice..
the best advice i can give is dont take dnthavakawmans advice..
Please Log in or Create an account to join the conversation.
- donthaveakawman
-
- User
-

Public
- Thanks: 0
Re: More bad news.
05 Mar 2013 02:17 - 05 Mar 2013 02:18
wireman and lushbaugh are all about "more bad news"
Last edit: 05 Mar 2013 02:18 by donthaveakawman.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
