Valve cover end seal replacement

  • w8lifter21
  • w8lifter21's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Automotive Afficianado
  • Posts: 25
  • Thanks: 0

Valve cover end seal replacement

28 Mar 2013 22:48
#579361
This is a pic from my parts bike, but I am getting a slight leak from these on my riding bike. Not to the point of an actual drip, but I do see that there is oil residue around these and below them. Are these actual seals that need to be replaced, or are they plugs with a gasket or sealant around them that maybe has degraded and is causing the leak?

'82 Kawayamazuki 750 (KZ750)
'91 300zx Twin Turbo
'96 Maxima

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Valve cover end seal replacement

28 Mar 2013 22:54
#579366
You can try removing valve cover and cleaning them up really good then gluing them back in with some 3-bond/yama bond,youll also need a new valve cover gasket.
You might want to check valve clearances at same time while valve cover is off. :)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • w8lifter21
  • w8lifter21's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Automotive Afficianado
  • Posts: 25
  • Thanks: 0

Re: Valve cover end seal replacement

28 Mar 2013 23:20
#579373
wireman wrote: You can try removing valve cover and cleaning them up really good then gluing them back in with some 3-bond/yama bond,youll also need a new valve cover gasket.
You might want to check valve clearances at same time while valve cover is off. :)

Good call, I did remember reading to check that. Assuming an adjustment would be needed, are there any parts I should have in advance to minimize downtime? I'll most likely end up doing it over a rainy weekend since its not that bad yet.
'82 Kawayamazuki 750 (KZ750)
'91 300zx Twin Turbo
'96 Maxima

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Valve cover end seal replacement

29 Mar 2013 00:03
#579383
If needing a factory service manual, may go to this site, and scroll down to "The Bible" for a free download.
kz.bike-night.com/

Checking valve clearances is the relatively easy part, compared to adjusting the clearances which is more difficult.

If needing adjustment, some disassembly is required in order to access the shims. Which is necessary to determine which size replacement shims are needed.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Valve cover end seal replacement

29 Mar 2013 00:16
#579386
If yours are old you may as well replace them; they probably have shrunk a little. They are still available from Kawasaki; they are about $4.50 each. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Valve cover end seal replacement

29 Mar 2013 00:43
#579387
Z1 Enterprises lists cam end plugs.

www.z1enterprises.com/ItemDetails.aspx?i...ZX750&item=MAVAP4002

Good Fortune!
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Matteson
  • Matteson's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 138
  • Thanks: 6

Re: Valve cover end seal replacement

29 Mar 2013 03:46
#579403
I recently used hondabond on the cam plugs. Is that gonna work?
KZ 900-a4

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: Valve cover end seal replacement

29 Mar 2013 08:15
#579417
Patton wrote: Z1 Enterprises lists cam end plugs.

www.z1enterprises.com/ItemDetails.aspx?i...ZX750&item=MAVAP4002

Good Fortune!

Where did I read on here just recently that posts like this are forbidden :kiss:
Larry C.

Please Log in or Create an account to join the conversation.

  • w8lifter21
  • w8lifter21's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Automotive Afficianado
  • Posts: 25
  • Thanks: 0

Re: Valve cover end seal replacement

29 Mar 2013 10:02
#579430
Thanks for the replies guys, I think ill just replace them and vc gasket.

The bike having 12k on it, opinions on what the valves will be like?
'82 Kawayamazuki 750 (KZ750)
'91 300zx Twin Turbo
'96 Maxima

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Valve cover end seal replacement

29 Mar 2013 10:55
#579442
The valves and their clearances should be fine, but I would still check them while you have the cover off. You may want to record the clearances and the mileage so the next time you check them you can see if there is any change. I have done that since buying my bike, and I am amazed that the clearances have remained so consistent over about 54,000 miles. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • w8lifter21
  • w8lifter21's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Automotive Afficianado
  • Posts: 25
  • Thanks: 0

Re: Valve cover end seal replacement

29 Mar 2013 11:25
#579445
Thanks for the input, I will definitely do that!
'82 Kawayamazuki 750 (KZ750)
'91 300zx Twin Turbo
'96 Maxima

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Valve cover end seal replacement

01 Apr 2013 21:31
#580032
LarryC wrote:
Patton wrote: Z1 Enterprises lists cam end plugs.

www.z1enterprises.com/ItemDetails.aspx?i...ZX750&item=MAVAP4002

Good Fortune!

Where did I read on here just recently that posts like this are forbidden :kiss:
Advertisers cant promote themselves,but other people can recommend them. :)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum