Square headlight HID conversion woes
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Square headlight HID conversion woes
07 Apr 2013 21:40 - 07 Apr 2013 21:43
Has anyone successfully installed a Bikemaster HID conversion on one of these rectangular reflectors on some of our KZs?
The original H4 bulb has a flat spot for the spring to push down, and the ring slots into the .."frame".
The replacement, the HID bulb, seems to offer no way of keeping the bulb in - the spring can't sit on a flat spot and the metal lock ring is too small to fit over the plastic part of the bulb.
I'd love to hear about what other folks have done to make this happen!
Attachment IMG_20130407_171841.jpg not found
The original H4 bulb has a flat spot for the spring to push down, and the ring slots into the .."frame".
The replacement, the HID bulb, seems to offer no way of keeping the bulb in - the spring can't sit on a flat spot and the metal lock ring is too small to fit over the plastic part of the bulb.
I'd love to hear about what other folks have done to make this happen!
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Last edit: 07 Apr 2013 21:43 by staniel.
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
- User
-

Public
- Thanks: 0
Re: Square headlight HID conversion woes
07 Apr 2013 23:07 - 07 Apr 2013 23:10
is there another black cover that goes with it....goes over plug and down to bulb, 2 to 3 inches in dia.
Last edit: 07 Apr 2013 23:10 by 4TheKZ1000.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Square headlight HID conversion woes
07 Apr 2013 23:19
On the stock headlight bulb, there's a rubber dust cover, is your's missing?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Re: Square headlight HID conversion woes
07 Apr 2013 23:23
Nope, there's no black rubber dust cover. The photo you attached looks like a round light. Mine is the rectangular one that came with the L3. My other L3's headlight also didn't have one, IIRC.
Here's the HID bulb thing.
Here's the HID bulb thing.
Attachment IMG_20130407_191747.jpg not found
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Please Log in or Create an account to join the conversation.
- staniel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 184
- Thanks: 5
Re: Square headlight HID conversion woes
11 Apr 2013 11:21
So, I figured it out: it takes some disassembly of the bulb thing. You have to unscrew the black plastic thing from the metal thing where it says "lock/open". When you take it out you can use the spring to hold down the metal and plastic receptacle. Once the spring and lockring are in place, you can screw the bulb back in.
Now I just have to figure out how to get the wiring taken care of and then be disappointed by the results!
Now I just have to figure out how to get the wiring taken care of and then be disappointed by the results!
1983 KZ750 L3 with 4-1 Kerker pipe and pods
1983 KZ750 L3 parts bike
1983 KZ750 L3 parts bike
Please Log in or Create an account to join the conversation.
- kzz1king
-
- Offline
- User
-

Registered
- Posts: 821
- Thanks: 52
Re: Square headlight HID conversion woes
11 Apr 2013 12:25
A lot will be determined by the reflector and how well it cuts off the beam vertically. I put one on my Concours and it turns night into day. I was not afraid to ride after dark anymore until I discovered how thick the bugs are then! Good fortune.
Wayne
Wayne
74 Z1 1075, 29 smoothbores, owned and ridden since 1976
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
