1980 kz1000G1

  • rlcarter
  • rlcarter's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 94
  • Thanks: 10

1980 kz1000G1

05 May 2013 15:46
#585798
i have a 1980 kz1000G1 fuel injected i was told i could take the fuel injection off and go to carbuators i have done this and cant get it to start it has spark but will not fire is there something else i need to do
1980 KZ1000 G w/carbs..

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: 1980 kz1000G1

05 May 2013 16:15
#585801
What type of carb did you install in the place of the FI?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • rlcarter
  • rlcarter's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 94
  • Thanks: 10

Re: 1980 kz1000G1

05 May 2013 16:47
#585803
MIKUNI off of a 1976 900
1980 KZ1000 G w/carbs..

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: 1980 kz1000G1

05 May 2013 16:58
#585804
Good fuel flow to the carbs? You don't have a vacuum operated petcock on the tank? I'd drop one or more float bowls & turn on the fuel to see if there's a blockage.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • rlcarter
  • rlcarter's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 94
  • Thanks: 10

Re: 1980 kz1000G1

05 May 2013 17:17
#585809
the carbs are getting fuel. could it be the difference in the heads where the injection mounted it has the carbs about an inch further away from the heads could that cause it to not pull the fuel into the cylinders.
1980 KZ1000 G w/carbs..

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: 1980 kz1000G1

05 May 2013 18:00
#585815
Have you done a compression and leak down test? A new/rebuilt engine might have 180-200 PSI, put some years & miles on it, and the compression might be 160 or so. An engine will run at 100 PSI, but burn more fuel, and produce low power. Checked the valve clearances too?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • rlcarter
  • rlcarter's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 94
  • Thanks: 10

Re: 1980 kz1000G1

05 May 2013 18:30
#585819
have not done a compression check yet but this bike has ran recently with the fuel injection on it what did you think about the difference of distance away from the heads the carbs are mounted because they were made for injectors .
1980 KZ1000 G w/carbs..

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: 1980 kz1000G1

05 May 2013 18:30
#585820
You did plug the injector holes or left the injectors in place?
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • rlcarter
  • rlcarter's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 94
  • Thanks: 10

Re: 1980 kz1000G1

05 May 2013 21:42
#585855
yes i have plugged the holes
1980 KZ1000 G w/carbs..

Please Log in or Create an account to join the conversation.

  • kzz1king
  • kzz1king's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 821
  • Thanks: 52

Re: 1980 kz1000G1

05 May 2013 23:01
#585874
I ran a fuely head for a long time with carbs with no issues,ran great.
Wayne
74 Z1 1075, 29 smoothbores, owned and ridden since 1976
Home built KZ1000 turbo setup

www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build

www.kzrider.com/forum/11-projects/532489-74-z-makeover

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 1980 kz1000G1

05 May 2013 23:28 - 05 May 2013 23:30
#585880
Perhaps the carb pilot circuits need cleaning, and maybe the enrichener (choke) circuit also.

Immediately after failure to start, do the spark plug tips have fuel on them?

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 05 May 2013 23:30 by Patton.

Please Log in or Create an account to join the conversation.

  • fitscott
  • fitscott's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 79
  • Thanks: 9

Re: 1980 kz1000G1

06 May 2013 16:43
#586006
I have a 1980 G1 and it ran fine with VM 26s. The extra length intakes didn't seem to cause any problems Good luck, Scott

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum