clutches
- brianrae33
-
Topic Author
- Offline
- User
-

Registered
- Posts: 318
- Thanks: 0
clutches
25 May 2013 15:53
anyone one of you knowledgable gentlemen have any tips on deglazing clutch plates??? What to us...technique...etc...thanx in advance
1982 kz1000ltd
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: clutches
26 May 2013 09:20 - 26 May 2013 09:23
OEM kit (Friction, Steel plates and springs ~ $120 @ Z1)...
For KZ900, check your manual for tolerances on the steel plates and springs first... If out of spec then replace, only way to go....
For KZ900, check your manual for tolerances on the steel plates and springs first... If out of spec then replace, only way to go....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 26 May 2013 09:23 by Old Man Rock.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
