Ultimate 83-84 GPz Crank

  • GypZee
  • GypZee's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 21
  • Thanks: 0

Ultimate 83-84 GPz Crank

29 May 2013 11:44
#589723
What would it be? Should I just have my current crank trued and welded or should I consider some sort of hybrid?

Since I already have a Wiseco 1173 kit I suppose I should stick with the 18mm pins. Is there a better option for a lighter crank itself? Maybe use a 900 crank? I know the complete crank/rod/center pin assemblies don't interchange, but what about hybrids?
83 GPz1100
85 GPz550

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Street Fighter LTD's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • TURBO, Its Better to be Blown than Injected
  • Posts: 5192
  • Thanks: 2340

Re: Ultimate 83-84 GPz Crank

29 May 2013 11:50
#589724
If you want light and strong with what ever combo possible contact a company like Falicon or Pearson . I have a Falicon crank in my bike now for over 30 years and will let that speak for itself. Don't know Pearson my self , but many here use his shop.

Not looking for a crank debate war . Just 2 references

Dave B) B) B)

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • GypZee
  • GypZee's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 21
  • Thanks: 0

Re: Ultimate 83-84 GPz Crank

29 May 2013 12:09
#589729
My bike retains the EFI bored-out by Pogue, has a header, and a set of Web-cam 109's. I plan on dropping the 10.5:1 1173 kit in and am considering at least welding the crank while apart that far. Then I thought if I can buy and build a better crank that I can swap-in at the time that would be even better than waiting for the crank to be done.

It's not a blown, nitrous, or anything else really wild, but thought if I were to buy a crank, why not look at making an improvement If it can be done within a reasonable budget?
83 GPz1100
85 GPz550

Please Log in or Create an account to join the conversation.

  • crh
  • crh's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 101
  • Thanks: 20

Re: Ultimate 83-84 GPz Crank

29 May 2013 13:44
#589741
Just send it to Pearson for a thrust bearing, true & weld. They were prone to thrust bearings going bad. John will inspect the whole crank and tell you if anything else is failing. The Pogue throttle bodies were a good choice.

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Ultimate 83-84 GPz Crank

29 May 2013 21:49
#589824
Gotta agree i would send it to Pearson Racing. John does excellent work. He did my crank and trans and the jugs.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • Dr. Gamma
  • Dr. Gamma's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1231
  • Thanks: 706

Re: Ultimate 83-84 GPz Crank

29 May 2013 22:04
#589828
This Pearson Racing, do they have a website?? All I find is some Pearson guy that does Gold Star cranks.

Last place I sent a motorcycle crank to was Marine Crankshaft out in California. Nice work!!!
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!

Up in the hills near Prescott, Az.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum