Think I figured out my problem!

Did another valve clearance check and this is what i got.
Shop manual says .10-.25 for intake valves. .15-.25 for exhaust. Would this cause my power loss? Also the cutting out under heavy throttle while cruising?
#1 intake .06
#2 intake .06
#3 intake .06.
#4 intake .11-.12

#1 exhaust .19-.22
#2 exhaust .13
#3 exhaust .14
#4 exhaust .16

Actually I am unsure if I did the check correctly. You line up the 1-4 mark on the T then I measure both exhaust and intake on 1,4? Im a little confused