Help!!! Bike won't start

  • smjohnston88
  • smjohnston88's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Help!!! Bike won't start

28 Sep 2013 14:28
#608127
I just had my engine rebuild carbs are clean and synced, valves are good, it just won't start. I checked the coils theyre good, the only thing is my bike leans alittle much on the kickstand, I was wondering if that could be a problem? Maybe causing the gas to go to one side of the carbs. I'm just really at a lose here any help or suggestions would be greatly appreciated.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Help!!! Bike won't start

28 Sep 2013 14:47
#608129
What model and year of bike?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • smjohnston88
  • smjohnston88's Avatar Topic Author
  • User
  • User
    Public
  • Thanks: 0

Re: Help!!! Bike won't start

28 Sep 2013 14:52
#608130
77 650s

Please Log in or Create an account to join the conversation.

  • PaulyWally
  • PaulyWally's Avatar
  • Offline
  • User
  • User
    Registered
  • Total Bike Newbie
  • Posts: 71
  • Thanks: 0

Re: Help!!! Bike won't start

28 Sep 2013 16:51 - 28 Sep 2013 16:54
#608135
smjohnston88 wrote: I just had my engine rebuild

Can you elaborate?

How long ago was the engine rebuilt? Was the bike running/starting OK before the engine was rebuilt... and as soon as the bike was put back together it wouldn't start?

More specifics would be helpful. But the first thing I would do is pull the plugs, check 'em for spark, and while they are out do a back-alley compression check. It won't cost you anything more than a half hour, and might get you on the right path.

Back-Alley Compression Check: Pull the spark plugs and press your thumb hard into each spark plug hole and turn the engine. If there isn't enough air pressure to break your thumb seal, you've got no compression.
1976 KZ750 Twin
Last edit: 28 Sep 2013 16:54 by PaulyWally.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Help!!! Bike won't start

28 Sep 2013 16:59
#608136
Put your bike on the center stand.
Turn the petcock on.
Turn the kill switch to run.
Pull the choke on.
Turn the key on.
DO NOT TOUCH THE THROTTLE.
DO NOT PULL IN THE CLUTCH LEVER.
Use the kick starter and kick it.
It should start.
Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum