Oil pressure issues

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Oil pressure issues

10 Oct 2013 20:15
#609565
I need some advice guys. Iam stumped. It all started last week me and buddy was out riding around our area. My oil cooler ended up getting a hair line fracture in the tank. I later found out that i must of came down to hard on it once and it hit the cooler. Well anyways we were messing around and i got on it and thats when my cooler let loose. I felt the oil on my leg. So i limped it home with the cooler leaking some. The oil light never came on and i was only about a 1/2 mile from the house. Soon i got back i checked the oil and it still had oil in it but it was low. Never had the first oil pressure light. Well i purchased a 13 row oil cooler from earls. I put the fittings down. I added oil and started it and it started up and the oil pressure light went off like normal. I let it sit for a couple seconds idling. No light. Started off down the road and i was babying it and i seen my light flicker. Then it did it again. From then on it stays on below 3 grand. I tried flipping the cooler over. I checked and changed the oil pressure sensor. Iam stumped. I checked all the passage ways. I blew thru the cooler. But you can take the line off and start it and when the pressure light is on its not pumping. But rev it up and light goes out and it starts pumping. And no before you ask i didnt run it for but just a few seconds with the line unhooked. So i pulled the pan and changed the pump, oil and filter. And the light still comes on. I havent tried any thing since i installed another pump and checked all passages to oil pressure sensors. But the light still comes on below 3 grand. But goes out and stays out above 3 grand. Any ideas would be greatly appreciated.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Oil pressure issues

10 Oct 2013 20:22 - 10 Oct 2013 20:33
#609567
No eBay APP ID and/or Cert ID defined in Kunena configurationI purchased an oil pressure gauge. I run between 3 and 6 pounds. I just don't trust the light. You might get the gauge so you would know what the pressure really is all the time.

I have this one and couldn't be happier.

Last edit: 10 Oct 2013 20:33 by 4TheKZ1000.

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Oil pressure issues

10 Oct 2013 20:42 - 10 Oct 2013 20:42
#609569
Ya i need one, ill have to see about getting one. but dont have one right now. Should also mention i inspected everything in the crankcase that you csn see from the bottom. There wasnt any shaving in the motor it still starts right up and runs like normal.
1977 KZ 1000 work in progress
Last edit: 10 Oct 2013 20:42 by Powerstroke_fan.

Please Log in or Create an account to join the conversation.

  • racer54
  • racer54's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1902
  • Thanks: 114

Re: Oil pressure issues

10 Oct 2013 21:17
#609576
Have you tried another pressure sensor to make sure it works correctly?
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Oil pressure issues

10 Oct 2013 21:49
#609582
Ya, i changed that first.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Oil pressure issues

10 Oct 2013 22:49 - 10 Oct 2013 23:02
#609588
Have you checked the pressure regulating valve when you had the sump down?
Spring and ball in both the oil filter bolt assy, and 3- 4 here in the fiche.

1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 10 Oct 2013 23:02 by Motor Head.
The following user(s) said Thank You: Powerstroke_fan

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Oil pressure issues

11 Oct 2013 08:05
#609627
I did glance at it and it was kinda reccessed into the hole some instead of flush.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum