82 kz440 valve setting
- kx_125_pilot
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
82 kz440 valve setting
12 Oct 2006 13:48
Hi, im new to the multi cylinder engine and I was wondering if anyone can give me detailed instructions on setting my valve clearances. Thanks in advance, Max
Please Log in or Create an account to join the conversation.
- Sputnic81
-
- Offline
- User
-

Registered
- Posts: 69
- Thanks: 0
Re: 82 kz440 valve setting
15 Oct 2006 20:41
not sure if it is there or not, but you might check
kz400.com
there's lots of 440 info there too. The Kawasaki shop manual for these things is a godsend. Pick on up on ebay there's almost always atleast one on there and they can be had for under $20 if you are patient. I was able to do a ground up restore on mine using that manual, and plenty of advice from the guys on here. I would love to see a pic of your bike I am thinking about lowering the rear on mine and blacking it out would love to see how it looks. Good luck.
Post edited by: Sputnic81, at: 2006/10/15 23:43
Post edited by: Sputnic81, at: 2006/10/15 23:43
Please Log in or Create an account to join the conversation.
- kx_125_pilot
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Please Log in or Create an account to join the conversation.
- kx_125_pilot
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: 82 kz440 valve setting
24 Oct 2006 22:16
well, checked out the sight, very informative.....got my vales set, easy as pie!
Please Log in or Create an account to join the conversation.
- 440luck
-
- Offline
- User
-

Registered
- Posts: 4
- Thanks: 0
Re: 82 kz440 valve setting
24 Apr 2013 19:18
Fellow 440 owner here, feeling a little discouraged.
I live in Albuquerque, NM, recently got my 82 kz440 started, but its backfiring and running both lean and rich simultaneously, Lean on right and rich on left. I was hoping you could tell me what you set your valves to, my guess is that resetting my valves can only improve how it runs, so long as I do it correctly of course.
Thanks
I live in Albuquerque, NM, recently got my 82 kz440 started, but its backfiring and running both lean and rich simultaneously, Lean on right and rich on left. I was hoping you could tell me what you set your valves to, my guess is that resetting my valves can only improve how it runs, so long as I do it correctly of course.
Thanks
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
