Need help on compression result
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
26 Jul 2011 08:38
Now I get it (after a little sleep)
I have some clearance so the valve is sitting since there no pressure on it. If it's leaking in that position, It's the valve seat or valve.
So even if I reshim it, won't change a thing.
Since the bike is running, I'll do a head job this winter.
Are there any other possible issue than a bad valve or seat? Just want to be sure that everything is fixable......
I have some clearance so the valve is sitting since there no pressure on it. If it's leaking in that position, It's the valve seat or valve.
So even if I reshim it, won't change a thing.
Since the bike is running, I'll do a head job this winter.
Are there any other possible issue than a bad valve or seat? Just want to be sure that everything is fixable......
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Need help on compression result
26 Jul 2011 08:43
theres a differance between minimum clearance when motor is cold and no clearance when the motor is hot,try a thinner shim on that exhuast valve and see if things change
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
26 Jul 2011 08:54
I,ll try to reshim it.
But I was in the idea that it was taken expension when hot, so if it leak cold, it will be worst hot.
I had carbon fooling (rich issus) on the plugs, could it be accumulation of carbon doing this. Would a miracle (seafoam) help this?
But I was in the idea that it was taken expension when hot, so if it leak cold, it will be worst hot.
I had carbon fooling (rich issus) on the plugs, could it be accumulation of carbon doing this. Would a miracle (seafoam) help this?
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Need help on compression result
26 Jul 2011 10:26
thats right it expands when hot,so if its borderline when its cold it could hang open when hot due to expansion.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
26 Jul 2011 10:29
I've check my old valve readind and there we're no clearance for this valve before I've ajusted them.
So this could probably lead to a burn valve from what I understand...
So this could probably lead to a burn valve from what I understand...
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Need help on compression result
26 Jul 2011 10:32
yes if valve hangs open it will not cool down
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Need help on compression result
26 Jul 2011 10:36jcote75 wrote: ...Are there any other possible issue than a bad valve or seat? Just want to be sure that everything is fixable......
Possibly a valve spring issue.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
26 Jul 2011 23:46
So I've ajust the valve tonight. It's now to max clearance.
I've done a leak test and still lossing from that ex valve
I've done a seafoam on that cylinder to see if I it was my lucky night and went for a 10 miles ride after.
Done a compression test once back........... same result. 135psi on 3 of them and 75psi on #3
The funny thing is that the #3 plug look the same as all the others......
The bike ride pretty good. Any danger to harm more the motor in running like this for the summer...
I've done a leak test and still lossing from that ex valve
I've done a seafoam on that cylinder to see if I it was my lucky night and went for a 10 miles ride after.
Done a compression test once back........... same result. 135psi on 3 of them and 75psi on #3
The funny thing is that the #3 plug look the same as all the others......
The bike ride pretty good. Any danger to harm more the motor in running like this for the summer...
Please Log in or Create an account to join the conversation.
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
27 Jul 2011 14:25
I saw on a web site a method to check for burnt valve.
You hold a piece of paper at the end of exhaust pipe and if it been suck in, burnt valve. If it blow off regulary air, it's fine....
Anyone heard of this test???? seem to easy.....
You hold a piece of paper at the end of exhaust pipe and if it been suck in, burnt valve. If it blow off regulary air, it's fine....
Anyone heard of this test???? seem to easy.....
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Need help on compression result
27 Jul 2011 14:31
A leak down test will confirm your woes. Air pumped into each cylinder while on compression stroke. Should be a regulated 100psi going in, and a gauge to show what percent it is leaking. then listen to where it goes, Intake/ Exhaust/ Crankcase, etc.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- jcote75
-
Topic Author
- Offline
- User
-

Registered
- Posts: 223
- Thanks: 0
Re: Need help on compression result
27 Jul 2011 14:37
I've done that. It loosing around 40% on #3. Air is comming out from the exhaust.
CAn I run with a burnt valve without danger of damaging other parts of the engine.
The motor is running fine and not smoking. Plug on #3 is fine...
So I would like to run like this all summer if possible.... and do the job this winter.
CAn I run with a burnt valve without danger of damaging other parts of the engine.
The motor is running fine and not smoking. Plug on #3 is fine...
So I would like to run like this all summer if possible.... and do the job this winter.
Please Log in or Create an account to join the conversation.
- Joe Fabulous
-
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 1
Re: Need help on compression result
27 Jul 2011 14:42
If you can do it, there's no reason to be off the road more than a week. Better to lose a week than cause more damage. All cylinder compression values should be within 10% of each other so there is a problem, it's definately not going to get better, only worse.
It's a pain but i'd bite the bullet and get it stripped and fixed.
It's a pain but i'd bite the bullet and get it stripped and fixed.
2004 Harley Davidson Softail
1981 Z1000 Chop
1982 KZ1100 A2
XS 650 Plunger Chop (in bits)
1981 Z1000 Chop
1982 KZ1100 A2
XS 650 Plunger Chop (in bits)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
