Assembly Lube

  • wilsow4
  • wilsow4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

Assembly Lube

12 Feb 2012 17:12
#503500
Hey guys,

I'm just curious as to what everyone uses for assembly lube when re-assembling an engine. Gonna be hittin that stage fairly soon and want to make sure I do it right!

Thanks,
Wes.

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: Assembly Lube

12 Feb 2012 17:22
#503503
Melling engine assembly lube is what we typically use. www.summitracing.com/parts/MEL-M-10012/
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Assembly Lube

12 Feb 2012 22:43 - 12 Feb 2012 22:43
#503605
Before fancy lube was available, we just painted the stuff with STP oil treatment using a small brush (it's high in ZDDP and sticks on surfaces well). My last rebuild I mixed STP and motor oil 50-50.
1979 KZ-750 Twin
Last edit: 12 Feb 2012 22:43 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Assembly Lube

12 Feb 2012 22:50
#503613
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: Assembly Lube

12 Feb 2012 23:50
#503631
I have a friend that builds pro mod car engines and he uses 50/50 oil/stp. He keeps it in a honey container that looks like a bear and tells everyone he uses honey. Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • z1kzonly's Avatar
  • Offline
  • User
  • User
    Registered
  • Sustaining Member
  • Posts: 2815
  • Thanks: 527

Re: Assembly Lube

13 Feb 2012 00:16
#503639
Hey Roy, thats cool with the Sue Bee Honey Bee.
Plain and simple, don't mix any oil!
Just use assembly lube.
I have old Lubri-Plate White lube I use.
This spray can is Moly bedum film. I use this on everything. I spray valve springs, lifter buckets.
But for camshafts this is the lastest stuff CRC, get it at any auto parts stores.
Oil is for rergular running. You want assembly lube for the first hour of running
This CRC stuff is only $6-7 bucks.
You want me to send you this stuff? You can use it.
Send me your address in a PM I'll have it in the mail in the morning.

Marty in Buffalo
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

  • elfmagic17
  • elfmagic17's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 334
  • Thanks: 24

Re: Assembly Lube

13 Feb 2012 02:13
#503660
I use Lubriplate on every engine I build, never had a problem. Knocked a hole in a oilpan on my Monza awhile after a build and pulled a main and a ron cap and look at it to check how they looked, and they looked like brand new bearings. Won't use anything else. But I'm sure most other lubes do a great job. The most important time is initial start up till you get the oil circulating. GM Engine Oil Supplement Is also very good stuff. ( paceperformance.com/i-6485869-88862586-g...mbly-lube-16-oz.html )
Kenny Hicks
74 Honda CB550
75 Honda CB360 (runs and rides good but not a show bike)
77 KZ650B1 (Runs Great, but needs painted and a little work.)

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Assembly Lube

13 Feb 2012 04:52
#503674
Just make sure it has ZDDP in it at least 2000 PPM.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • notaduc
  • notaduc's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 297
  • Thanks: 3

Re: Assembly Lube

13 Feb 2012 10:31
#503698
So then are you aiming for 1000ppm when you mix 50/50? As stp is lower than 2000...
1980 (mostly) KZ1000

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: Assembly Lube

13 Feb 2012 12:31 - 13 Feb 2012 12:33
#503724
He uses this 50/50 mix and then he primes his engine with I don't know what. He probably builds 10 engines a season and the each cost over $30,000 and he hasn't had a failure yet.

It was not my intention to put bad info out. I should have asked him his whole procudure. Roy
1979 LTD Street Fighter.1977 KZ1000
Last edit: 13 Feb 2012 12:33 by roy-b-boy-b.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Assembly Lube

13 Feb 2012 19:13 - 13 Feb 2012 19:19
#503787
notaduc wrote: So then are you aiming for 1000ppm when you mix 50/50? As stp is lower than 2000...
Not really, a 50-50 mix is probably WAYYYY above 2000 ppm. The MSDS sheet on STP reads that it has "2 - 3% zinc compounds". It has about 12 ounces in the can, dilutes that into about 128 ounces of oil typically, so that thins it down to about 0.2% - 0.3% which just happens to be the ballpark of 2000 - 3000 ppm. I actually wrote STP and asked about it, all they would say is that when used in the crankcase it raises ZDDP levels back up to "original" levels.

That would indicate that when diluted at a 50-50 ratio with oil, the zinc compounds are about 1% which is wayy too high to run continuously but OK to run on bearing surfaces at startup after rebuild.
1979 KZ-750 Twin
Last edit: 13 Feb 2012 19:19 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Assembly Lube

13 Feb 2012 19:16 - 13 Feb 2012 19:18
#503788
roy-b-boy-b wrote: He uses this 50/50 mix and then he primes his engine with I don't know what. He probably builds 10 engines a season and the each cost over $30,000 and he hasn't had a failure yet.

It was not my intention to put bad info out. I should have asked him his whole procudure. Roy
Back in the 60's, using STP on rebuilds was standard procedure (that's all there was). Probably a million rebuilds done that way, did a few myself. Never had a problem. The new assembly lube might be better, has more stuff in it to cut friction.
1979 KZ-750 Twin
Last edit: 13 Feb 2012 19:18 by bountyhunter.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum