Engine refuses to fire
- Ruminus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 25
- Thanks: 0
Re: Engine refuses to fire
17 Nov 2011 10:55
Here's another thought. I'm almost out of gas and the gas it has is pretty old from just sitting waiting on me to get it running. Despite the fact that a) the carb bowls are filling and b) the gas in the tank has Sta-Bil in it, does anyone think a couple fresh gallons might do any good? :huh:
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Engine refuses to fire
17 Nov 2011 11:03
Fresh Gas won't hurt a thing.
Just wondering, have you read where i posted, Maybe the Timing Advancer Is assembled 180 out?
Maybe see if the 1 or 4 piston is up at the top, when the 1-4 mark on the advancer is lined up with the case mark. If is a possibility.
Just wondering, have you read where i posted, Maybe the Timing Advancer Is assembled 180 out?
Maybe see if the 1 or 4 piston is up at the top, when the 1-4 mark on the advancer is lined up with the case mark. If is a possibility.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Ruminus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 25
- Thanks: 0
Re: Engine refuses to fire
17 Nov 2011 11:06 - 17 Nov 2011 11:12I replied earlier, but it's probably buried since you guys have been giving me so much great input. :woohoo: Yes, I checked the Timing Advancer, it's pretty much impossible to assemble it 180 out due to the stud on the r/h crankshaft end that mates to an index slot on the rear of the advancer. Also, I pulled the 1 and 4 plugs and visually verified the pistons are @TDC when the IgAdv says they should be.Motor Head wrote: Fresh Gas won't hurt a thing.
Just wondering, have you read where i posted, Maybe the Timing Advancer Is assembled 180 out?
Maybe see if the 1 or 4 piston is up at the top, when the 1-4 mark on the advancer is lined up with the case mark. If is a possibility.
For that matter, while I had them out, I checked to see if I could see all 8 valves moving properly. Everything looks to cycle just as it should. Now, do they seat as they should? They looked to when I had the head off (as in no light visible and good solvent tests), but until I can get that darn compression gauge, that's anyone's guess.
Last edit: 17 Nov 2011 11:12 by Ruminus. Reason: Fix my n008 terminology
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Engine refuses to fire
17 Nov 2011 11:12
OK that's good. The Pin holds the Advancer to the end of the Crank in one position, but the advancer can be assembled 180 out, pin still lining up with the crank correctly, the moving part of the unit can be put on 180 out.
So have you taken a compression reading with a gauge, Throttles full open?
So have you taken a compression reading with a gauge, Throttles full open?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Ruminus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 25
- Thanks: 0
Re: Engine refuses to fire
17 Nov 2011 11:15The gauge is my nemesis and I have yet to be able to use the one I was promised use of. I'm going to have to break down (pun not intended) and get my own. As far as the IA, the index mark on the plate aligns with the case mark at the T 1 4 mark when 1 and 4 are TDC, so I'm guessing that's good. Also, to the best of my knowledge, it was just unbolted, never completely disassembled.Motor Head wrote: OK that's good. The Pin holds the Advancer to the end of the Crank in one position, but the advancer can be assembled 180 out, pin still lining up with the crank correctly, the moving part of the unit can be put on 180 out.
So have you taken a compression reading with a gauge, Throttles full open?
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Engine refuses to fire
17 Nov 2011 11:25
Some of the Auto parts stores will loan out tools, with a deposit of course, if your on a budget this might get your test done.
I had bought a Harbor Freight 1 to use the adapter for the smaller 12mm thread on this later bike. I found it read low, and returned it. So take that as you will, cheap Chinese stuff unfortunately.
Also Tool rental Stores will have many tools for rent, although a good compression gauge and a leak down tester is a good part of any Engine Tool Kit.
I had bought a Harbor Freight 1 to use the adapter for the smaller 12mm thread on this later bike. I found it read low, and returned it. So take that as you will, cheap Chinese stuff unfortunately.
Also Tool rental Stores will have many tools for rent, although a good compression gauge and a leak down tester is a good part of any Engine Tool Kit.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
